Disc Brake Resurfacing: BRM Announces Magazine Article and Product Video About Flex-Hone for Rotors Tools for DIY Brake Jobs - NewsOn6.com - Tulsa, OK - News, Weather, Video and Sports - KOTV.com |

Disc Brake Resurfacing: BRM Announces Magazine Article and Product Video About Flex-Hone for Rotors Tools for DIY Brake Jobs


This article was originally distributed via PRWeb. PRWeb, WorldNow and this Site make no warranties or representations in connection therewith.


Brush Research Manufacturing (BRM), Made in America maker of flexible honing tools and industrial brushes, announces DSPORT magazine article and YouTube video about do-it-yourself (DIY) disc brake repairs. Flex-Hone® for Rotors tools mount in handheld electric drills and impart non-directional surface finish that helps quiet brake noise.

Los Angeles, CA (PRWEB) July 16, 2014

Brush Research Manufacturing (BRM), Made in USA supplier of surface finishing solutions, is announcing a magazine article and product video about the Flex-Hone® for Rotors. Designed for use with a handheld power drill, BRMs flexible honing tool is trusted by professional brake technicians and DIY mechanics alike. This brake hone is suitable for both new and turned rotors, and imparts an ideal surface finish.

In Glaze is for Donuts: Do-It-Yourself Disc Brake Resurfacing, DSPORT magazine explains why the Flex-Hone® for Rotors is the right tool for eliminating brake pad glaze and surface corrosion, conditions that can cause brake noise. As author Jun Chen explains to magazine readers, the Flex-Hone for Rotors can help you save a few bucks and get rid of that annoying brake judder for good.

Surface Finishing Solutions

As the article in DSPORTs August edition reports, some motorists blame brake vibrations on warped rotors. Most modern rotors are made of a type of iron, however, and are unlikely to warp because of the metals stability and hardness. Typically then, brake noise is caused by an uneven layer of brake pad material that accumulates on the face of the rotor.

Improper pad bedding isnt the only cause of noisy brakes, however, as surface corrosion and improper machining may be to blame. For all of these surface condition problems, the Flex-Hone® for Rotors is the solution. Built with BRMs Flex-Hone® technology and designed for flat surfaces instead of cylinder walls, this brushing tool can also be used to surface finish flywheels, clutch plates, and brake drums.

Rotor Hone Selection and Use

The Flex-Hone® for Rotors comes in coarse, medium, and fine grits. As BRM explains in a downlodable brochure, users should work in towards the center and then out to the edge, applying light pressure to the rotors face. Rotate the rotor hone between 300 and 600 RPM, and remember that dwell time not excessive pressure produces the desired finish.

To test the Flex-Hone® for Rotors under real-world conditions, DSPORT magazine acquired four brake rotors from a race car with some time at the track. Equipped with a cordless drill and a coarse-grit brush tool, the crew removed the transfer layer from each rotors face. The DIY mechanics then switched to a medium-grit tool, and finally to a fine-grit tool. Because the Flex-Hone® for Rotors is self-leveling and applies uniform pressure, keeping the brush tool square and flat was an easy task.

For more information, read Glaze is for Donuts: Do-It-Yourself Disc Brake Resurfacing, and watch the Flex-Hone for Rotors® DIY Brake Resurfacing video.

About Brush Research Manufacturing

Brush Research Manufacturing (BRM), makers of flexible honing tools and a full line of industrial brushes, is located in Los Angeles, California. For over 55 years, BRM has been solving surface finishing challenges with brushing technology. BRMs Flex-Hone® tool is the industry standard against which all other surface finishing solutions are compared. Visit the BRM website to learn more.

Media Contact:
Heather Jones
Director of Marketing
Brush Research Manufacturing Co. Inc.
4642 Floral Drive
Los Angeles, CA 90022

For Immediate Release:
Ph: (323) 261-2193

For the original version on PRWeb visit: http://www.prweb.com/releases/2014/07/prweb12016270.htm

Information contained on this page is provided by an independent third-party content provider. WorldNow and this Station make no warranties or representations in connection therewith. If you have any questions or comments about this page please contact pressreleases@worldnow.com.

Powered by WorldNow
News On 6
303 N. Boston Ave.
Tulsa, OK 74103
Oklahoma's Own Newson6.com is proud to provide Oklahomans with timely and relevant news and information, sharing the stories, pictures and loves of Oklahomans across our great state including Tulsa's Own and Green Country's Own.
All content © Copyright 2000 - 2014, WorldNow and KOTV. All Rights Reserved. For more information on this site, please read our Privacy Policy and Terms of Service.