Thursday, January 28th 2010, 11:56 am
NewsOn6.com
UNDATED -- Winter weather means people will be looking for different ways to stay warm. The Tulsa Red Cross reminds us that there's a safe way - and a potentially deadly way to use fuel-burning appliances.
According to the Consumer Product Safety Commission, every year more than 200 people in the United States die from Carbon Monoxide (CO) produced by fuel-burning appliances (furnaces, ranges, water heaters, room heaters). Others die from CO produced while burning charcoal inside a home, garage, vehicle or tent. Still others die from CO produced by cars left running in attached garages. Several thousand people go to hospital emergency rooms each year for treatment for CO poisoning.
Carbon Monoxide (known by the chemical symbol CO) is a colorless and practically odorless gas. It is poisonous to people and animals, because it displaces oxygen in the blood. It is produced by the incomplete burning of solid, liquid, and gaseous fuels. Appliances fueled with natural gas, liquefied petroleum (LP gas), oil, kerosene, coal, or wood may produce CO. Burning charcoal produces CO. Running cars produce CO.
Carbon Monoxide (known by the chemical symbol CO) is a colorless and practically odorless gas. It is poisonous to people and animals, because it displaces oxygen in the blood. It is produced by the incomplete burning of solid, liquid, and gaseous fuels. Appliances fueled with natural gas, liquefied petroleum (LP gas), oil, kerosene, coal, or wood may produce CO. Burning charcoal produces CO. Running cars produce CO.
What are the symptoms of CO poisoning?
Carbon Monoxide can have different affects on people based on its concentration in the air that people breathe. Because you can't smell, taste, or see it, you can not tell that CO gas is present. The health effects of CO depend on the level of CO and length of exposure, as well as each individual's health condition.
The initial symptoms of CO poisoning are similar to the flu (but without fever). They include:
Many people with CO poisoning mistake their symptoms for the flu or are misdiagnosed, which sometimes results in tragic deaths.
Because CO replaces oxygen in the blood, it can make people feel sleepy. Or, if they are asleep, it can prevent people from waking up.
At higher concentrations, people can experience impaired vision and coordination, headaches, dizziness, confusion, and nausea. In very high concentrations, CO poisoning can cause death.
Buy and Install CO detectors/alarms
The American Red Cross recommends that everyone install CO detectors/alarms in homes and recreational vehicles.
What can you do to prevent CO poisoning?
Make sure appliances are installed according to manufacturer's instructions and local building codes. Most appliances should be installed by professionals. A carbon monoxide detector/alarm can provide added protection, but is no substitute for proper use and upkeep of appliances that can produce CO.
What should you do if you experience symptoms of CO poisoning?
If you think you are experiencing any of the symptoms of CO poisoning, get fresh air immediately. Open windows and doors for more ventilation, turn off any combustion appliances, and leave your home. Then call your fire department and report your symptoms. You could lose consciousness and die if you do nothing. It is also important to contact a doctor immediately for a proper diagnosis. Tell your doctor that you suspect CO poisoning is causing your problems. Prompt medical attention is important if you are experiencing any symptoms of CO poisoning when you are operating fuel-burning appliances. Before turning your fuel-burning appliances back on, make sure a qualified serviceperson checks them for malfunction.
What should you do when the CO detector/alarm sounds?
Treat the alarm signal as a real emergency each time. If the detector/alarm sounds and you are not experiencing any symptoms described above, press the reset button. If the detector/alarm continues to sound, call the fire department. Immediately leave your home until a professional checks to find the reason why the detector/alarm sounded, and any problems are fixed.
How to test a CO detector/alarm to make sure it is working
Follow the manufacturer's instructions. Using a test button, some detectors/alarms test whether the circuitry as well as the sensor which senses CO is working, while the test button on other detectors only tests whether the circuitry is working. For those units which test the circuitry only, some manufacturers sell separate test kits to help the consumer test the CO sensor inside the alarm.
If you have further questions, please contact your local Department of Public Health or local fire department.
January 28th, 2010
September 29th, 2024
September 17th, 2024
December 12th, 2024
December 12th, 2024
December 12th, 2024